Air to Water Heat Pump Systems

In:

Air source heat pumps absorb heat from the outside to heat buildings. Air-to-Water heat pumps are used to heat water to provide heating to a building through radiators or an under-floor heating system.

Benefits

The benefits of air source heat pumps are similar to ground-source heat systems. Firstly, neither type of system requires the use or storage of external fuel. The systems instead run on electricity, which eliminates the need for a gas connection or storage of oil/solid fuel. Air source heat pumps present an advantage over ground source heat pumps because they require less space to install. Instead of requiring the installation of buried underground coils, air source systems can be fitted using much less space and are therefore, more suited for an urban home.

How it works

In the same way that a fridge uses refrigerant to extract heat from the inside, keeping your food cool, and air source heat pump extracts heat from the outside air, and uses it to heat your home and hot water. An air-source heat pump has three main parts:

  • The evaporator coil absorbs heat from the outside air;
  • The compressor pumps the refrigerant through the heat pump and compresses the gaseous refrigerant to the temperature needed for the heat distribution circuit;
  • The heat exchanger transfers the heat from the refrigerant to air or water.

In an air-to-water system, the heat produced is used to heat water, which can be used to pre-heat water in a storage tank or circulate through under-floor heating or radiators. Heat pumps produce hot water that is a lower temperature (typically 35-45°C) than standard boiler systems, which makes under-floor heating the most effective option.

The efficiency of air source systems is measured by a coefficient of performance (CoP). CoPs for air source systems are almost comparable with ground-source heat pumps, and generally range between 2 and 3. This means that for every unit of electricity used to power the pump, 2-3 units of heat are produced, making it an efficient way of heating a building.

It is even possible for air source heat pumps to extract useful heat from air at temperatures as low as minus 15°C.

Is it suitable for my home?

You should consider the following issues if you're thinking about installing an air source heat pump.

  • You will need space on an external wall outside your house to fit the evaporator coil.
  • An air source heat pump should cover the heating requirements of a well insulated property. Due to the lower temperature compared with traditional boilers, it is essential that your home is insulated and draught proofed. These measures will lower your heat demand and make the system more effective.
  • Consider what fuel is being replaced: if it's electricity, oil, Liquid Petroleum Gas (LPG) or coal, the payback will be more favourable than gas. Heat pumps are a good option where gas is unavailable.
  • The type of heat distribution system. Air source heat pumps can be used to heat water that is circulated through radiators but under floor heating is more effective due to the lower temperature of the air/water produced.
  • Is the system for a new building development? Combining the installation with other building works can reduce costs.
  • If you want to further reduce your home's CO2 emissions you can purchase a green electricity tariff or install solar PV or some other form of renewable electricity generating system to power the compressor and pump.

Kelly’s expert advice is essential on the choice and sizing of Heat Pumps to ensure optimal efficiency and cost effectiveness is attained. Any Air to Water Heat Pump range can meet the total heating and hot water needs of the domestic and industrial customer, irrespective of the size or location of the building.

Kelly’s Renewable Energy Solutions, supply Alpha Innotech Air to Water Heat Pump systems. Alpha Innotech have been designing and installing Air to Water Heat Pump systems for more than 15 years in Ireland.

Kelly’s Renewable Energy Solutions and Alpha Innotech’s combination ensures our customers achieve the most modern, efficient and environmentally friendly Air to Water heating installation available today.

Additional Resources

Alpha - Innotech Heat Pumps "Warmth and comfort" product brochure: http://www.alpha-innotec.com/uploads/Image_engl_A_062_07_Druckdatei.pdf.

See also: